mirror of
https://github.com/mbirth/wiki.git
synced 2024-11-09 13:16:45 +00:00
46 lines
2.5 KiB
Markdown
46 lines
2.5 KiB
Markdown
|
---
|
||
|
|
title: HTC Universal shuts down at xx% of battery left
|
||
|
|
layout: default
|
||
|
|
created: 2008-07-15 00:14:06 +0200
|
||
|
|
updated: 2008-07-15 00:14:06 +0200
|
||
|
|
toc: false
|
||
|
|
tags:
|
||
|
|
- know-how
|
||
|
|
- software
|
||
|
|
- windows-mobile
|
||
|
|
- htc-universal
|
||
|
|
---
|
||
|
|
(from: <http://forum.xda-developers.com/showthread.php?p=1790263#post1790263>)
|
||
|
|
|
||
|
|
> Fellow universal users who suffer from battery problems, i know this issue is reccuring and is in many threads and
|
||
|
|
> forums now. However i am sorry to increase the talk in another thread. I just thought i would share my peice of
|
||
|
|
> advice.
|
||
|
|
>
|
||
|
|
> Attached is a pic of the universal battery and below is a little procedure that you might wanna try.
|
||
|
|
>
|
||
|
|
> Lets say your universal battery is dying after 10 mins and you just had charged it overnight (meter says it died at
|
||
|
|
> 95% or whatever.. ) here is what you do.
|
||
|
|
>
|
||
|
|
> 1. take the battery out locate the pin provided in this pic attached. its the second pin from the top if you are
|
||
|
|
> holding the battery with the connector being to the upper right corner (just see the pic)
|
||
|
|
> 1. cover this pin with a thin peice of tape that you will leave temporarily. till the battery fully dies.
|
||
|
|
> 1. turn your universal on after placing the battery in it again
|
||
|
|
> 1. change the power settings in a way that leaves the universal on for all the time unless you manually turn it off..
|
||
|
|
> so all the power savings are off.
|
||
|
|
> 1. let your battery drain all the way until it just turns the universal off.
|
||
|
|
> 1. take the battery out and remove the insulation from that pin
|
||
|
|
> 1. turn your universal on again and let it charge overnight or till the light turns green.
|
||
|
|
> 1. this fixed my universals' battery and now mine turns off at 5%
|
||
|
|
>
|
||
|
|
> p.s. while the universal is running and the pin is insulated you will notice that the battery indicator that shows
|
||
|
|
> the percentage left doesn't work. (thats the whole point making the ppc blind and not being able to read how much is
|
||
|
|
> in the batter and take full advantage of whats in it as far as power goes, this will make the battery realize that it
|
||
|
|
> was drained more than usual and forces it to recalculate or recalibrate itself.
|
||
|
|
>
|
||
|
|
> by the way you will also notice that the universal wont be able to get charged while that pin is insulated. so again
|
||
|
|
> my advice is fully charge your battery , take it out, insulate the pin then drain it all the way, take the insulation
|
||
|
|
> out and recharge until light is green.
|
||
|
|
>
|
||
|
|
> please post if you had a successful result and hopefully for all who are suffering from this battery problem now they
|
||
|
|
> have one more
|