diff --git a/assets/toyota-touch-2-ecu-selection.jpg b/assets/toyota-touch-2-ecu-selection.jpg
new file mode 100755
index 0000000..ac4a4f0
Binary files /dev/null and b/assets/toyota-touch-2-ecu-selection.jpg differ
diff --git a/assets/toyota-touch-2-service-menu.jpg b/assets/toyota-touch-2-service-menu.jpg
new file mode 100755
index 0000000..8acfe8e
Binary files /dev/null and b/assets/toyota-touch-2-service-menu.jpg differ
diff --git a/assets/toyota-touch-2-transfer-complete.jpg b/assets/toyota-touch-2-transfer-complete.jpg
new file mode 100755
index 0000000..c975710
Binary files /dev/null and b/assets/toyota-touch-2-transfer-complete.jpg differ
diff --git a/assets/toyota-touch-2-update-progress.jpg b/assets/toyota-touch-2-update-progress.jpg
new file mode 100755
index 0000000..252441c
Binary files /dev/null and b/assets/toyota-touch-2-update-progress.jpg differ
diff --git a/know-how/hacking/_posts/2017-10-21-toyota-touch-2-firmware-update.md b/know-how/hacking/_posts/2017-10-21-toyota-touch-2-firmware-update.md
index 224bd93..1d3a610 100644
--- a/know-how/hacking/_posts/2017-10-21-toyota-touch-2-firmware-update.md
+++ b/know-how/hacking/_posts/2017-10-21-toyota-touch-2-firmware-update.md
@@ -53,20 +53,25 @@ The Update
1. Turn on the ignition (Don't start the car.)
1. Wait until the radio screen comes on
1. Remove all USB sticks and/or CDs from your headunit
-1. Press and hold the MEDIA key and while holding it, turn on and off the low beams
- 3 times in a row. A service menu should appear. Let go of the MEDIA button now.
+1. Press and hold the MEDIA (might be a ♬) button and while holding it,
+ turn on and off the low beams 3 times in a row. A service menu should appear. Let go of the
+ MEDIA button now.
+ ![]({{ site.url }}/assets/toyota-touch-2-service-menu.jpg)
1. Tap on "Service Information".
1. Tap on "Program Update".
1. Connect the USB stick with the firmware file.
1. Tap on "OK". A message about a detected update media should appear.
1. Tap "OK" again. A screen "ECU Selection" with only one entry should appear.
+ ![]({{ site.url }}/assets/toyota-touch-2-ecu-selection.jpg)
1. Tap "Select" for the one entry.
1. To start the actual update, tap "OK".
1. **WAIT!** Until the blue bar fills up and **turns green**.
+ ![]({{ site.url }}/assets/toyota-touch-2-transfer-complete.jpg)
1. Tap "OK".
-1. With leaving the USB stick plugged in and not touching anything else: Turn off the ignition.
-1. Turn on the ignition again. (Don't start the car.)
+1. Leaving the USB stick plugged in and not touching anything else: Turn off the ignition.
+1. Turn on the ignition again, USB still plugged. (Don't start the car.)
1. Wait until the radio screen comes on (might take a little longer this time).
+ ![]({{ site.url }}/assets/toyota-touch-2-update-progress.jpg)
1. Remove the USB stick.
1. Turn off the ignition.
1. **WAIT** for about 30 seconds or more. (I was able to hear the device's fan turning off after