Fixed OLs.

know-how/hardware/_posts/2009-05-12-analog-tft-calibration.md

@@ -17,8 +17,8 @@ in some cases. If the following picture shows some flickering or looks blurry, y
 
 To calibrate your display, go to [Randy Simons' page](http://randysimons.com/pagina_131_NL.xhtml) and do the following:
 
-  - open the [sync pattern page](http://randysimons.com/overige/tftAutoAlignPattern/)
+1. open the [sync pattern page](http://randysimons.com/overige/tftAutoAlignPattern/)
-  - put your browser in full-screen mode (mostly by pressing <kbd>F11</kbd>)
+2. put your browser in full-screen mode (mostly by pressing <kbd>F11</kbd>)
-  - issue the auto-calibration on your TFT display (most displays have a specific *"Auto"* button)
+3. issue the auto-calibration on your TFT display (most displays have a specific *"Auto"* button)
-  - make sure the picture doesn't flicker anymore
+4. make sure the picture doesn't flicker anymore
-  - exit full-screen mode (<kbd>F11</kbd> again)
+5. exit full-screen mode (<kbd>F11</kbd> again)

know-how/hardware/_posts/2011-10-09-dymo-labelwriter-320-under-ubuntu.md

@@ -16,18 +16,18 @@ This label printer doesn't work out of the box under Linux. There are some instr
 [ubuntuforums.org](http://ubuntuforums.org/showthread.php?t=861781), but they're missing something
 for the latest Ubuntu *Oneiric Ocelot*. These instructions should work:
 
-  - download the DYMO SDK `dymo-cups-drivers-1.2.0.tar.gz` from [dymo.com](http://sites.dymo.com/DeveloperProgram/Pages/LW_SDK_Linux.aspx)
+1. download the DYMO SDK `dymo-cups-drivers-1.2.0.tar.gz` from [dymo.com](http://sites.dymo.com/DeveloperProgram/Pages/LW_SDK_Linux.aspx)
-  - unpack (a directory `dymo-cups-drivers-1.2.0` will be created)
+1. unpack (a directory `dymo-cups-drivers-1.2.0` will be created)
-  - make sure you've installed [libcups2-dev](apt://libcups2-dev) and [libcupsimage2-dev](apt://libcupsimage2-dev) (and, of course, [build-essential](apt://build-essential))
+1. make sure you've installed [libcups2-dev](apt://libcups2-dev) and [libcupsimage2-dev](apt://libcupsimage2-dev) (and, of course, [build-essential](apt://build-essential))
-  - run `./configure`
+1. run `./configure`
-  - try a `make all`, you will most probably get various errors like *"size_t has not been declared"* or *"size_t does not name a type"* --- if so, try this:
+1. try a `make all`, you will most probably get various errors like *"size_t has not been declared"* or *"size_t does not name a type"* --- if so, try this:
     * add a line: `#include <stddef.h>` as the first line to the following files:
       * `src/lw/LabelWriterLanguageMonitor.h`
       * `src/lw/LabelWriterDriver.h`
       * `src/common/Halftoning.h`
     * now, again, run `make all`
-  - run `sudo make install`
+1. run `sudo make install`
-  - now open **System Settings** → **Printer**
+1. now open **System Settings** → **Printer**
-  - make sure, your LabelWriter is connected
+1. make sure, your LabelWriter is connected
-  - add a new printer, choose your LabelWriter, when asked for a driver, point it to `ppd/lw320.ppd` from the `dymo-cups-drivers-1.2.0` directory
+1. add a new printer, choose your LabelWriter, when asked for a driver, point it to `ppd/lw320.ppd` from the `dymo-cups-drivers-1.2.0` directory
-  - start printing, e.g. from [glabels](apt://glabels)
+1. start printing, e.g. from [glabels](apt://glabels)

know-how/hardware/_posts/2013-11-27-technisat-digicorder.md

@@ -34,9 +34,9 @@ Rip recordings to DVD
     avconv -i movie.ts -target pal-dvd -b:v 8888k -vcodec mpeg2video -acodec copy -ac 6 -mbd rd -trellis 2 -cmp 2 -subcmp 2 -q:v 1 -r 25 -s 720x576 -aspect 16:9 -f vob -y movie.mpg
 
 
-  - cut and demux using *ProjectX* 
+1. cut and demux using *ProjectX* 
     * if not yet set, set Presettings → Special → global PTS shift (in hours) to **auto**
-  - burn DVD using AVStoDVD
+2. burn DVD using AVStoDVD
 
 Notes:
 

know-how/hardware/apple-iphone/_posts/2010-04-20-tips-and-tricks.md

@@ -36,18 +36,18 @@ yourself a favor and **don't try it in Windows**. Installing `libusb` there brok
 Windows, all USB devices didn't work and hat yellow exclamation marks in the Windows device manager. Under Linux,
 it's easy as pie. These instructions are for Ubuntu:
 
-  - get [iRecovery](http://github.com/westbaer/irecovery) source code and install [build-essential](apt://build-essential) as well as [libusb-dev](apt://libusb-dev)
+1. get [iRecovery](http://github.com/westbaer/irecovery) source code and install [build-essential](apt://build-essential) as well as [libusb-dev](apt://libusb-dev)
-  - compile *iRecovery*
+1. compile *iRecovery*
-  - get the iPhone into recovery mode:
+1. get the iPhone into recovery mode:
     * switch it completely off, disconnect all cables
     * hold down the ▢ Home button
     * keep the button down while connecting it to the PC
     * wait until the *"Connect to iTunes"* logo appears, then release the ▢ Home button
-  - now run: `./irecovery -s`
+1. now run: `./irecovery -s`
-  - wait for the prompt (`]`) and enter the following commands: (if `fsboot` doesn't do anything, type `reboot`)  
+1. wait for the prompt (`]`) and enter the following commands: (if `fsboot` doesn't do anything, type `reboot`)  
 {% highlight text %}
 ] setenv auto-boot true
 ] saveenv
 ] fsboot
 {% endhighlight %}
-  - your iPhone should now boot normally
+1. your iPhone should now boot normally

know-how/hardware/google-nexus-one/_posts/2010-05-23-manual-firmware-update.md

@@ -15,12 +15,12 @@ tags:
 To manually update the firmware, put the new firmware named as `update.zip` onto the root directory of the microSD card.
 Then do this: (found at [androidspin.com](http://forum.androidspin.com/showthread.php?t=2631))
 
-  - power off the phone
+1. power off the phone
-  - hold down the trackball and press the Power button.
+1. hold down the trackball and press the Power button.
-  - you'll get a white screen with three Android robots on skateboards → select *Bootloader*
+1. you'll get a white screen with three Android robots on skateboards → select *Bootloader*
-  - now select *Recovery*
+1. now select *Recovery*
-  - the phone will reboot showing a robot and a warning sign
+1. the phone will reboot showing a robot and a warning sign
-  - now press Power and Volume up together (if it doesn't work the first time, try again)
+1. now press Power and Volume up together (if it doesn't work the first time, try again)
-  - now choose *Apply sdcard:update.zip* (use trackball!)
+1. now choose *Apply sdcard:update.zip* (use trackball!)
-  - wait for it to finish
+1. wait for it to finish
-  - choose *Reboot now*
+1. choose *Reboot now*

know-how/hardware/samsung-galaxy-nexus/_posts/2012-04-02-manual-firmware-update.md

@@ -19,25 +19,25 @@ To find out if your device has this broken firmware, check the build number: **I
 
 To flash the official firmware, do as follows:
 
-  - if you already set up everything on your device, you can make a backup:
+1. if you already set up everything on your device, you can make a backup:
-    - backup the internal settings using `adb backup -all -system -shared -apk` (enable *USB Debugging* first, under Windows you may have to install some drivers)
+    1. backup the internal settings using `adb backup -all -system -shared -apk` (enable *USB Debugging* first, under Windows you may have to install some drivers)
-      * this will create a file `backup.ab` with your data
+        * this will create a file `backup.ab` with your data
-      * :warning: There was a bug in 4.0.1 which didn't backup `/mnt/sdcard` using adb. To fix this, manually backup the contents of `/mnt/sdcard` using a
+        * :warning: There was a bug in 4.0.1 which didn't backup `/mnt/sdcard` using adb. To fix this, manually backup the contents of `/mnt/sdcard` using a
-        tool like [FTPServer](https://play.google.com/store/apps/details?id=lutey.FTPServer), [WebSharing](https://play.google.com/store/apps/details?id=nextapp.websharing.r1) or similar
+          tool like [FTPServer](https://play.google.com/store/apps/details?id=lutey.FTPServer), [WebSharing](https://play.google.com/store/apps/details?id=nextapp.websharing.r1) or similar
-  - download the official firmware from <http://code.google.com/android/nexus/images.html#yakju> (European devices are **yakju**, Verizon is **mysid**)
+1. download the official firmware from <http://code.google.com/android/nexus/images.html#yakju> (European devices are **yakju**, Verizon is **mysid**)
-  - download `fastboot` for Windows from <http://code.google.com/p/android-roms/downloads/detail?name=fastboot-win32.zip&can=2&q=>, for Linux try to find a binary package
+1. download `fastboot` for Windows from <http://code.google.com/p/android-roms/downloads/detail?name=fastboot-win32.zip&can=2&q=>, for Linux try to find a binary package
-  - boot the phone into the bootloader (hold both volume keys and then hold the power key)
+1. boot the phone into the bootloader (hold both volume keys and then hold the power key)
-  - use `fastboot` to flash the bootloader
+1. use `fastboot` to flash the bootloader
-  - `fastboot reload-bootloader`
+1. `fastboot reload-bootloader`
-  - use `fastboot` to flash the radio firmware
+1. use `fastboot` to flash the radio firmware
-  - `fastboot reload-bootloader`
+1. `fastboot reload-bootloader`
-  - use `fastboot` to flash the main firmware (that ZIP file)
+1. use `fastboot` to flash the main firmware (that ZIP file)
-  - if you really need an unlocked bootloader to easily update in the future, do it now: (it will be locked after update)
+1. if you really need an unlocked bootloader to easily update in the future, do it now: (it will be locked after update)
-    - boot into the bootloader
+    1. boot into the bootloader
-    - `fastboot oem unlock`
+    1. `fastboot oem unlock`
-    - reboot
+    1. reboot
-  - to restore your backed up settings, do this:
+1. to restore your backed up settings, do this:
-    - set up all previous Google- and eMail-accounts
+    1. set up all previous Google- and eMail-accounts
-    - enable *USB Debugging*
+    1. enable *USB Debugging*
-    - restore all internal data using `adb restore backup.ab`
+    1. restore all internal data using `adb restore backup.ab`
-    - maybe: use FTPServer, WebSharing or similar to restore `/mnt/sdcard`
+    1. maybe: use FTPServer, WebSharing or similar to restore `/mnt/sdcard`