mirror of
https://github.com/mbirth/wiki.git
synced 2024-12-25 23:04:06 +00:00
Fixed OLs.
This commit is contained in:
parent
9a03973995
commit
ba8fd6de96
@ -17,8 +17,8 @@ in some cases. If the following picture shows some flickering or looks blurry, y
|
||||
|
||||
To calibrate your display, go to [Randy Simons' page](http://randysimons.com/pagina_131_NL.xhtml) and do the following:
|
||||
|
||||
- open the [sync pattern page](http://randysimons.com/overige/tftAutoAlignPattern/)
|
||||
- put your browser in full-screen mode (mostly by pressing <kbd>F11</kbd>)
|
||||
- issue the auto-calibration on your TFT display (most displays have a specific *"Auto"* button)
|
||||
- make sure the picture doesn't flicker anymore
|
||||
- exit full-screen mode (<kbd>F11</kbd> again)
|
||||
1. open the [sync pattern page](http://randysimons.com/overige/tftAutoAlignPattern/)
|
||||
2. put your browser in full-screen mode (mostly by pressing <kbd>F11</kbd>)
|
||||
3. issue the auto-calibration on your TFT display (most displays have a specific *"Auto"* button)
|
||||
4. make sure the picture doesn't flicker anymore
|
||||
5. exit full-screen mode (<kbd>F11</kbd> again)
|
||||
|
||||
@ -16,18 +16,18 @@ This label printer doesn't work out of the box under Linux. There are some instr
|
||||
[ubuntuforums.org](http://ubuntuforums.org/showthread.php?t=861781), but they're missing something
|
||||
for the latest Ubuntu *Oneiric Ocelot*. These instructions should work:
|
||||
|
||||
- download the DYMO SDK `dymo-cups-drivers-1.2.0.tar.gz` from [dymo.com](http://sites.dymo.com/DeveloperProgram/Pages/LW_SDK_Linux.aspx)
|
||||
- unpack (a directory `dymo-cups-drivers-1.2.0` will be created)
|
||||
- make sure you've installed [libcups2-dev](apt://libcups2-dev) and [libcupsimage2-dev](apt://libcupsimage2-dev) (and, of course, [build-essential](apt://build-essential))
|
||||
- run `./configure`
|
||||
- try a `make all`, you will most probably get various errors like *"size_t has not been declared"* or *"size_t does not name a type"* --- if so, try this:
|
||||
1. download the DYMO SDK `dymo-cups-drivers-1.2.0.tar.gz` from [dymo.com](http://sites.dymo.com/DeveloperProgram/Pages/LW_SDK_Linux.aspx)
|
||||
1. unpack (a directory `dymo-cups-drivers-1.2.0` will be created)
|
||||
1. make sure you've installed [libcups2-dev](apt://libcups2-dev) and [libcupsimage2-dev](apt://libcupsimage2-dev) (and, of course, [build-essential](apt://build-essential))
|
||||
1. run `./configure`
|
||||
1. try a `make all`, you will most probably get various errors like *"size_t has not been declared"* or *"size_t does not name a type"* --- if so, try this:
|
||||
* add a line: `#include <stddef.h>` as the first line to the following files:
|
||||
* `src/lw/LabelWriterLanguageMonitor.h`
|
||||
* `src/lw/LabelWriterDriver.h`
|
||||
* `src/common/Halftoning.h`
|
||||
* now, again, run `make all`
|
||||
- run `sudo make install`
|
||||
- now open **System Settings** → **Printer**
|
||||
- make sure, your LabelWriter is connected
|
||||
- add a new printer, choose your LabelWriter, when asked for a driver, point it to `ppd/lw320.ppd` from the `dymo-cups-drivers-1.2.0` directory
|
||||
- start printing, e.g. from [glabels](apt://glabels)
|
||||
1. run `sudo make install`
|
||||
1. now open **System Settings** → **Printer**
|
||||
1. make sure, your LabelWriter is connected
|
||||
1. add a new printer, choose your LabelWriter, when asked for a driver, point it to `ppd/lw320.ppd` from the `dymo-cups-drivers-1.2.0` directory
|
||||
1. start printing, e.g. from [glabels](apt://glabels)
|
||||
|
||||
@ -34,9 +34,9 @@ Rip recordings to DVD
|
||||
avconv -i movie.ts -target pal-dvd -b:v 8888k -vcodec mpeg2video -acodec copy -ac 6 -mbd rd -trellis 2 -cmp 2 -subcmp 2 -q:v 1 -r 25 -s 720x576 -aspect 16:9 -f vob -y movie.mpg
|
||||
|
||||
|
||||
- cut and demux using *ProjectX*
|
||||
1. cut and demux using *ProjectX*
|
||||
* if not yet set, set Presettings → Special → global PTS shift (in hours) to **auto**
|
||||
- burn DVD using AVStoDVD
|
||||
2. burn DVD using AVStoDVD
|
||||
|
||||
Notes:
|
||||
|
||||
|
||||
@ -36,18 +36,18 @@ yourself a favor and **don't try it in Windows**. Installing `libusb` there brok
|
||||
Windows, all USB devices didn't work and hat yellow exclamation marks in the Windows device manager. Under Linux,
|
||||
it's easy as pie. These instructions are for Ubuntu:
|
||||
|
||||
- get [iRecovery](http://github.com/westbaer/irecovery) source code and install [build-essential](apt://build-essential) as well as [libusb-dev](apt://libusb-dev)
|
||||
- compile *iRecovery*
|
||||
- get the iPhone into recovery mode:
|
||||
1. get [iRecovery](http://github.com/westbaer/irecovery) source code and install [build-essential](apt://build-essential) as well as [libusb-dev](apt://libusb-dev)
|
||||
1. compile *iRecovery*
|
||||
1. get the iPhone into recovery mode:
|
||||
* switch it completely off, disconnect all cables
|
||||
* hold down the ▢ Home button
|
||||
* keep the button down while connecting it to the PC
|
||||
* wait until the *"Connect to iTunes"* logo appears, then release the ▢ Home button
|
||||
- now run: `./irecovery -s`
|
||||
- wait for the prompt (`]`) and enter the following commands: (if `fsboot` doesn't do anything, type `reboot`)
|
||||
1. now run: `./irecovery -s`
|
||||
1. wait for the prompt (`]`) and enter the following commands: (if `fsboot` doesn't do anything, type `reboot`)
|
||||
{% highlight text %}
|
||||
] setenv auto-boot true
|
||||
] saveenv
|
||||
] fsboot
|
||||
{% endhighlight %}
|
||||
- your iPhone should now boot normally
|
||||
1. your iPhone should now boot normally
|
||||
|
||||
@ -15,12 +15,12 @@ tags:
|
||||
To manually update the firmware, put the new firmware named as `update.zip` onto the root directory of the microSD card.
|
||||
Then do this: (found at [androidspin.com](http://forum.androidspin.com/showthread.php?t=2631))
|
||||
|
||||
- power off the phone
|
||||
- hold down the trackball and press the Power button.
|
||||
- you'll get a white screen with three Android robots on skateboards → select *Bootloader*
|
||||
- now select *Recovery*
|
||||
- the phone will reboot showing a robot and a warning sign
|
||||
- now press Power and Volume up together (if it doesn't work the first time, try again)
|
||||
- now choose *Apply sdcard:update.zip* (use trackball!)
|
||||
- wait for it to finish
|
||||
- choose *Reboot now*
|
||||
1. power off the phone
|
||||
1. hold down the trackball and press the Power button.
|
||||
1. you'll get a white screen with three Android robots on skateboards → select *Bootloader*
|
||||
1. now select *Recovery*
|
||||
1. the phone will reboot showing a robot and a warning sign
|
||||
1. now press Power and Volume up together (if it doesn't work the first time, try again)
|
||||
1. now choose *Apply sdcard:update.zip* (use trackball!)
|
||||
1. wait for it to finish
|
||||
1. choose *Reboot now*
|
||||
|
||||
@ -19,25 +19,25 @@ To find out if your device has this broken firmware, check the build number: **I
|
||||
|
||||
To flash the official firmware, do as follows:
|
||||
|
||||
- if you already set up everything on your device, you can make a backup:
|
||||
- backup the internal settings using `adb backup -all -system -shared -apk` (enable *USB Debugging* first, under Windows you may have to install some drivers)
|
||||
1. if you already set up everything on your device, you can make a backup:
|
||||
1. backup the internal settings using `adb backup -all -system -shared -apk` (enable *USB Debugging* first, under Windows you may have to install some drivers)
|
||||
* this will create a file `backup.ab` with your data
|
||||
* :warning: There was a bug in 4.0.1 which didn't backup `/mnt/sdcard` using adb. To fix this, manually backup the contents of `/mnt/sdcard` using a
|
||||
tool like [FTPServer](https://play.google.com/store/apps/details?id=lutey.FTPServer), [WebSharing](https://play.google.com/store/apps/details?id=nextapp.websharing.r1) or similar
|
||||
- download the official firmware from <http://code.google.com/android/nexus/images.html#yakju> (European devices are **yakju**, Verizon is **mysid**)
|
||||
- download `fastboot` for Windows from <http://code.google.com/p/android-roms/downloads/detail?name=fastboot-win32.zip&can=2&q=>, for Linux try to find a binary package
|
||||
- boot the phone into the bootloader (hold both volume keys and then hold the power key)
|
||||
- use `fastboot` to flash the bootloader
|
||||
- `fastboot reload-bootloader`
|
||||
- use `fastboot` to flash the radio firmware
|
||||
- `fastboot reload-bootloader`
|
||||
- use `fastboot` to flash the main firmware (that ZIP file)
|
||||
- if you really need an unlocked bootloader to easily update in the future, do it now: (it will be locked after update)
|
||||
- boot into the bootloader
|
||||
- `fastboot oem unlock`
|
||||
- reboot
|
||||
- to restore your backed up settings, do this:
|
||||
- set up all previous Google- and eMail-accounts
|
||||
- enable *USB Debugging*
|
||||
- restore all internal data using `adb restore backup.ab`
|
||||
- maybe: use FTPServer, WebSharing or similar to restore `/mnt/sdcard`
|
||||
1. download the official firmware from <http://code.google.com/android/nexus/images.html#yakju> (European devices are **yakju**, Verizon is **mysid**)
|
||||
1. download `fastboot` for Windows from <http://code.google.com/p/android-roms/downloads/detail?name=fastboot-win32.zip&can=2&q=>, for Linux try to find a binary package
|
||||
1. boot the phone into the bootloader (hold both volume keys and then hold the power key)
|
||||
1. use `fastboot` to flash the bootloader
|
||||
1. `fastboot reload-bootloader`
|
||||
1. use `fastboot` to flash the radio firmware
|
||||
1. `fastboot reload-bootloader`
|
||||
1. use `fastboot` to flash the main firmware (that ZIP file)
|
||||
1. if you really need an unlocked bootloader to easily update in the future, do it now: (it will be locked after update)
|
||||
1. boot into the bootloader
|
||||
1. `fastboot oem unlock`
|
||||
1. reboot
|
||||
1. to restore your backed up settings, do this:
|
||||
1. set up all previous Google- and eMail-accounts
|
||||
1. enable *USB Debugging*
|
||||
1. restore all internal data using `adb restore backup.ab`
|
||||
1. maybe: use FTPServer, WebSharing or similar to restore `/mnt/sdcard`
|
||||
|
||||
Loading…
Reference in New Issue
Block a user