1
0
mirror of https://github.com/mbirth/wiki.git synced 2024-12-24 22:54:09 +00:00

Added photos for Toyota Touch 2 update.

This commit is contained in:
Markus Birth 2017-12-26 20:37:35 +01:00
parent 5b658126d7
commit 90707041b4
Signed by: mbirth
GPG Key ID: A9928D7A098C3A9A
5 changed files with 9 additions and 4 deletions

Binary file not shown.

After

Width:  |  Height:  |  Size: 33 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 40 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 30 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 37 KiB

View File

@ -53,20 +53,25 @@ The Update
1. Turn on the ignition (Don't start the car.)
1. Wait until the radio screen comes on
1. Remove all USB sticks and/or CDs from your headunit
1. Press and hold the <kbd>MEDIA</kbd> key and while holding it, turn on and off the low beams
3 times in a row. A service menu should appear. Let go of the <kbd>MEDIA</kbd> button now.
1. Press and hold the <kbd>MEDIA</kbd> (might be a <kbd></kbd>) button and while holding it,
turn on and off the low beams 3 times in a row. A service menu should appear. Let go of the
<kbd>MEDIA</kbd> button now.
![]({{ site.url }}/assets/toyota-touch-2-service-menu.jpg)
1. Tap on "Service Information".
1. Tap on "Program Update".
1. Connect the USB stick with the firmware file.
1. Tap on "OK". A message about a detected update media should appear.
1. Tap "OK" again. A screen "ECU Selection" with only one entry should appear.
![]({{ site.url }}/assets/toyota-touch-2-ecu-selection.jpg)
1. Tap "Select" for the one entry.
1. To start the actual update, tap "OK".
1. **WAIT!** Until the blue bar fills up and **turns green**.
![]({{ site.url }}/assets/toyota-touch-2-transfer-complete.jpg)
1. Tap "OK".
1. With leaving the USB stick plugged in and not touching anything else: Turn off the ignition.
1. Turn on the ignition again. (Don't start the car.)
1. Leaving the USB stick plugged in and not touching anything else: Turn off the ignition.
1. Turn on the ignition again, USB still plugged. (Don't start the car.)
1. Wait until the radio screen comes on (might take a little longer this time).
![]({{ site.url }}/assets/toyota-touch-2-update-progress.jpg)
1. Remove the USB stick.
1. Turn off the ignition.
1. **WAIT** for about 30 seconds or more. (I was able to hear the device's fan turning off after