mirror of
https://github.com/mbirth/wiki.git
synced 2024-09-20 06:33:24 +01:00
47 lines
2.7 KiB
Markdown
47 lines
2.7 KiB
Markdown
---
|
|
created: 2008-07-21 19:19:56 +0200
|
|
layout: redirect
|
|
layout_old: default
|
|
redirect_to: https://blog.mbirth.de/archives/2008/07/21/dell-latitude-cpi-series.html
|
|
tags:
|
|
- know-how
|
|
- hacking
|
|
- hardware
|
|
- bios
|
|
- passwords
|
|
- dell
|
|
- latitude
|
|
title: DELL Latitude CPi series
|
|
toc: false
|
|
updated: 2008-07-21 19:19:56 +0200
|
|
---
|
|
|
|
Thanks to *Heiko Kehr*. (Everything was done according to [this manual](http://www.darkmagic.org/mike/dell-tag/dell/dell.html).)
|
|
|
|
1. You can easily remove the keyboard after loosing the six screws. Pay attention that you lift the keyboard equally on
|
|
all sides and not only on one key. It would be sad to unlock this nice thing and then have a broken keyboard.
|
|
|
|
1. The yellow arrow marks the connector to the keyboard. If you are a used to handle with electronic devices, you may
|
|
just flip the keyboard carefully leaving it connected. If you have opened up an electronic device for the first time,
|
|
please, put everything back in place and bring your notebook to someone who does such things more often. Oh, now is
|
|
a good time to remove all power sources from the notebook (Remove AC plug and battery!!).
|
|
|
|
1. To remove the CPU-circuit board without damaging it, you have to carefully remove the clamp marked with a blue arrow.
|
|
It is just clipped on and you can later replace it without any need to bend it.
|
|
I then lifted the circuit board a bit on the right side to detach it from the connector. By pushing it back and
|
|
lifting it one the left side (on the cooler) at the same time, it slowly slipped out of the connector.
|
|
|
|
1. I then thought of how I may power on the notebook while shorting the EEPROM. I had the idea of using wires which I
|
|
may have cut from the outside, so that I did not have to disassemble the notebook again.
|
|
 
|
|
|
|
1. Nevertheless, I opened it again to remove the wires, and for taking photos. But I didn't heat the soldering iron
|
|
again, instead, I "broke the wires away".
|
|
I soldered them using a gas soldering iron. First, because of static electricity charge and second … because it was
|
|
the first thing in my hand. After replacing all neccessary parts, I shorted the two wires with my right hand while
|
|
powering on the notebook with the left one. The now seen message was very different from those I knew. Splitted
|
|
wires and went into the BIOS. I changed settings to the best of my knowledge and rebooted. Pleasure!!
|
|
|
|
|
|
|
|
[Back to overview.]({% post_url 2009-10-30-bios-passwords %}) |