mirror of
https://github.com/mbirth/wiki.git
synced 2024-11-14 14:06:46 +00:00
55 lines
2.3 KiB
Markdown
55 lines
2.3 KiB
Markdown
---
|
|
title: /boot to own partition
|
|
layout: default
|
|
created: 2008-09-12 21:53:07 +0200
|
|
updated: 2009-03-31 11:48:44 +0200
|
|
toc: false
|
|
tags:
|
|
- know-how
|
|
- software
|
|
- linux
|
|
- software
|
|
- bootup
|
|
---
|
|
Using an emulated SCSI-adapter in VMware with a very large root disk may give you either
|
|
|
|
Error 18: Selected Cylinder exceeds maximum supported by BIOS
|
|
|
|
or
|
|
|
|
Error 16: Inconsistent Filesystem Structure
|
|
|
|
This is because the *initrd* image is created (maybe only partially) outside the 1024-cylinder boundary accessible by
|
|
the VMware BIOS. The only stress-free solution is to move `/boot` to its own partition directly at the beginning of the
|
|
virtual disk. There is a nice how-to from [Tek Guru](http://tekguru.wordpress.com/2007/09/04/howto-moving-boot-to-its-own-partition/).
|
|
|
|
So use your favourite partitioner (I prefer GPartEd from the [SysRescCD](http://www.sysresccd.org/).) and move the
|
|
beginning of the first partition about 100 MiB to the right to add a new *ext3* partition in front of it. 100 MiB
|
|
should be enough for most people. You may need to use `fdisk`'s expert menu to fix the partition ordering if you can't
|
|
live with a `/dev/sda3` at the beginning of the disk.
|
|
|
|
Afterwards mount both partitions, the future `/boot` and the system partition and copy the contents of `/boot` to the
|
|
new and empty partition. Rename the old boot-folder and create a new empty one. Edit the `fstab` and add following line:
|
|
|
|
/dev/sda3 /boot ext3 rw 0 1
|
|
|
|
(Tek Guru used `ro` here to mount the partition read-only. As Ubuntu often updates the initrd, `rw` is the better way.)
|
|
|
|
Now open the `grub/menu.lst` and remove the `/boot` in front of the entries. Since grub sees the plain partition,
|
|
everything is in the root directory at this point. Maybe you also have to change the `root hd(0,X)` if your `X` is
|
|
not `0` (= the first partition).
|
|
|
|
Using the rescuecd, you can now boot your system using the `rescuecd boothd=/dev/sda2` (`root=/dev/sda2` in recent
|
|
versions) parameter. If the system is up, run
|
|
|
|
grub-install /dev/sda
|
|
|
|
to finally install grub correctly. You should now be able to boot.
|
|
|
|
|
|
<p><div class="noteclassic" markdown="1">
|
|
You can use the same technique to get around the 137 GB / 128 GiB limit of some
|
|
older mainboards. Just create a `/boot` partition at the beginning and after the kernel has loaded the controller
|
|
module, the (BIOS-)limit is gone.
|
|
</div></p>
|