mirror of
https://github.com/mbirth/wiki.git
synced 2024-11-09 13:16:45 +00:00
71 lines
3.7 KiB
Markdown
71 lines
3.7 KiB
Markdown
---
|
|
redirect_from:
|
|
- /know-how/hardware/fortuna-gpsmartbt/
|
|
title: Fortuna GPSmart BT
|
|
layout: default
|
|
created: 2009-02-02 19:07:10 +0100
|
|
updated: 2010-07-22 09:55:56 +0200
|
|
toc: false
|
|
tags:
|
|
- know-how
|
|
- hardware
|
|
- fortuna
|
|
- gpsmart
|
|
- gps
|
|
---
|
|
**Homepage:** [fortuna.com.tw](http://www.fortuna.com.tw/gpsmart.htm)
|
|
|
|
<img src="{{ site.url }}/assets/gpsmart.jpg" height="300" alt="Fortuna GPSmart" />
|
|
|
|
|
|
No fix since 2005-07-11
|
|
=======================
|
|
|
|
There is an error in the original firmware of the GPSmart that the device almost never get a fix since July, 11th 2005.
|
|
The function to calculate the visible satellites is erroneus and gives wrong values since that date. So the device searches for satellites which are not visible.
|
|
|
|
On [this page on eXpansys](http://www.expansys.com/ft.aspx?code=105113&thread=39), *johnr_61* writes that he patched the firmware with new ephemeris data
|
|
so that everything works fine again. This patch should work until 2010-11-22.
|
|
|
|
|
|
Update firmware
|
|
===============
|
|
|
|
Connect the device with the special cable. (Normal Mini-USB cables don't work since the devices actually provides only a standard serial interface
|
|
which has to be converted to normal USB using the `PL2303`-IC from Prolific.)
|
|
|
|
Use *FortunaSync* to establish the connection (*Link to Fortuna GPS*) and then use *SirfFlash* to upload the new firmware.
|
|
|
|
<p><div class="noteimportant" markdown="1">
|
|
There are some devices where the flashing doesn't work. If you try to establish a connection using *FortunaSync*, the device locks up.
|
|
Some of these devices have a jumper `R30` on the PCB which should be shorted to get directly into flashing mode. Mine didn't have one
|
|
but had a `J2` which might had the same effect, but it still didn't work. After some trying I found out that this device goes into
|
|
the *SiRF Binary*-communication mode instead of the *NMEA*-mode the newer devices go into. So if you use *SirfDemo* to switch the
|
|
device to NMEA-format, the firmware upgrade works until the device reboots itself. After that it's back into SiRF Binary mode and the upgrade fails.
|
|
</div></p>
|
|
|
|
|
|
Power cable
|
|
===========
|
|
|
|
You might have noticed that you can't power the GPSmart using a normal USB-to-MiniUSB cable. The backlight for the display can be switched
|
|
on and off, but the display itself doesn't show anything. Since I had the same problem with my *HTC Universal*, I found a solution
|
|
at [forum.xda-developers.com](http://forum.xda-developers.com/showthread.php?t=285768). According to [Wikipedia](http://en.wikipedia.org/wiki/Universal_Serial_Bus#USB_cables),
|
|
the 4th pin is used for detection of *USB On-The-Go*, i.e. whether the other device provides power or not. Interestingly, the roles seem a bit mixed up here.
|
|
According to Wikipedia, if pin #4 is grounded, the socket should provide power. Here it is that pin #4 has to be grounded for the device to accept power (for charging).
|
|
|
|
After opening the GPSmart and bridging pins 4 and 5, I could successfully power the device via a normal USB-to-MiniUSB cable. After removing the bridge, the device powered off.
|
|
|
|
My first idea for a solution was to use conductive lacquer coat to bridge the pins inside the MiniUSB plug. But then I remembered I had some adaptor:
|
|
|
|
|
|
|
|
And lucky for me, the pins were already bridged in this thing. So I can now power my GPSmart using a normal USB extension cable and this adaptor.
|
|
|
|
|
|
Sync cable
|
|
==========
|
|
|
|
The MiniUSB port on the GPSmart is not really a USB interface. The GPSmart has a serial interface and also uses the port for power.
|
|
The FortunaSync cable uses a [FTDI FT232BM](http://www.ftdichip.com/FTProducts.htm#FT232BM) which also controls pin #4 (see above). This IC converts the serial signals to USB.
|