mirror of
https://github.com/mbirth/wiki.git
synced 2024-11-09 13:16:45 +00:00
174 lines
7.0 KiB
Markdown
174 lines
7.0 KiB
Markdown
---
|
|
title: Speed up Synology volume reshaping
|
|
layout: default
|
|
language: en
|
|
created: 2017-05-28 23:45:40 +0200
|
|
updated: 2017-05-29 19:22:31 +0200
|
|
toc: false
|
|
tags:
|
|
- know-how
|
|
- hardware
|
|
- synology
|
|
- diskstation
|
|
- dsm
|
|
- raid
|
|
- lvm
|
|
- reshape
|
|
- extend
|
|
- volume
|
|
- storage
|
|
---
|
|
I wanted to increase the available storage on my Synology DS415+ by replacing 2x 2TB disks with
|
|
4TB ones, extending my 4-4-2-2 volume to 4-4-4-4 and the overall storage space from 8TB to 12TB.
|
|
|
|
After replacing the first disk, there was the data reconstruction which finished after 2 hours
|
|
or so. But then came the reshaping (to use the full 4TB instead of only 2TB) which I left running
|
|
over night (~10 hours) and it still only got to 20%.
|
|
|
|
That made me wonder how long the overall process might take and if that is normal.
|
|
|
|
Google brought me to [this](https://forum.synology.com/enu/viewtopic.php?t=79595) and
|
|
[this](https://forum.synology.com/enu/viewtopic.php?t=124489) forum post which suggested this
|
|
command for checking the status and estimated runtime:
|
|
|
|
```
|
|
root@DiskStation:~# cat /proc/mdstat
|
|
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
|
|
md3 : active raid5 sdd6[2] sda6[0] sdb6[1]
|
|
1953494784 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
|
|
[=====>...............] reshape = 25.1% (491263360/1953494784) finish=5198.4min speed=4687K/sec
|
|
|
|
md2 : active raid5 sdd5[4] sda5[0] sdc5[5] sdb5[1]
|
|
5846049792 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [UUUU]
|
|
|
|
md1 : active raid1 sdd2[3] sda2[0] sdb2[1] sdc2[2]
|
|
2097088 blocks [4/4] [UUUU]
|
|
|
|
md0 : active raid1 sdd1[3] sda1[0] sdb1[1] sdc1[2]
|
|
2490176 blocks [4/4] [UUUU]
|
|
|
|
unused devices: <none>
|
|
```
|
|
|
|
As you can see, for me it showed about 5200 minutes left. That would be almost 87 hours, or a
|
|
little bit over 3½ days. Given that some people reported runtimes of 16 days, I assumed I was
|
|
lucky already.
|
|
|
|
However, the `speed` indicator of the above command showed values around 4-6 MB/sec which is
|
|
rather slow for hard drives capable of 100 MB/sec and more.
|
|
|
|
People mentioned running services on the DiskStation to be a problem, especially indexing services
|
|
for e.g. the PhotoStation. So I stopped every service I didn't need (from the *Package Manager*)
|
|
and paused those services which appeared at the top for the `top` command, i.e. which were using
|
|
the CPU:
|
|
|
|
```
|
|
root@DiskStation:~# synoservice --pause synomkthumbd
|
|
root@DiskStation:~# synoservice --pause pkgctl-FileStation
|
|
root@DiskStation:~# synoservice --pause scemd
|
|
root@DiskStation:~# synoservice --pause synorelayd
|
|
root@DiskStation:~# synoservice --pause synoindexd
|
|
```
|
|
|
|
(Just remember to `--resume` them after everything is done.)
|
|
|
|
Now to the tweaking of the lvm parameters. Since I didn't want to just change settings to values
|
|
from the forums without knowing why and what they do, I searched for a site explaining the
|
|
different parameters and I found [this nice page](https://baptiste-wicht.com/posts/2015/03/how-to-speed-up-raid-5-6-growing-with-mdadm.html)
|
|
which explains the commands and their effects in terms of speed and memory consumption.
|
|
|
|
The `sysctl dev.raid.speed_limit_max` already showed a reasonable value of `200000` (200 MB/sec)
|
|
but I raised it to 500 MB/sec - just to be sure.
|
|
|
|
sysctl -w dev.raid.speed_limit_max=500000
|
|
|
|
As expected, this didn't do anything. On to the next parameter from that page - the
|
|
`stripe_cache_size`. First, check the current (default) value:
|
|
|
|
root@DiskStation:~# cat /sys/block/md3/md/stripe_cache_size
|
|
256
|
|
|
|
This means the stripe cache is 256 pages of 4096 Bytes each = 1 MiB per disk. Not very much.
|
|
So I increased it as per the recommendation to 4096 pages = 16 MiB per disk:
|
|
|
|
echo 4096 > /sys/block/md2/md/stripe_cache_size
|
|
echo 4096 > /sys/block/md3/md/stripe_cache_size
|
|
|
|
(`md2` and `md3` are my `raid5` devices. See `mdstat` output above.)
|
|
|
|
This brought the biggest effect. The estimated runtime left immediately fell to around 1300
|
|
minutes, fluctuating between 1100 and 1800 minutes:
|
|
|
|
```
|
|
root@DiskStation:~# cat /proc/mdstat
|
|
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
|
|
md3 : active raid5 sdd6[2] sda6[0] sdb6[1]
|
|
1953494784 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
|
|
[=====>...............] reshape = 26.0% (509001728/1953494784) finish=1338.0min speed=17992K/sec
|
|
```
|
|
|
|
That was already impressive, cutting down the overall time from 3.5 days to 22 hours.
|
|
And we had another parameter to tweak: the read-ahead. Again, we first want to figure out the
|
|
default value:
|
|
|
|
root@DiskStation:~# blockdev --getra /dev/md3
|
|
384
|
|
|
|
Since the value is in "sectors" of 512 Bytes, that comes in at 192 KiB. As we have plenty of RAM
|
|
(upgraded my DS to 8GB), I've set this to the recommended 32 MiB:
|
|
|
|
root@DiskStation:~# blockdev --setra 65536 /dev/md3
|
|
root@DiskStation:~# blockdev --setra 65536 /dev/md2
|
|
|
|
And that gave another small boost:
|
|
|
|
```
|
|
root@DiskStation:~# cat /proc/mdstat
|
|
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
|
|
md3 : active raid5 sdd6[2] sda6[0] sdb6[1]
|
|
1953494784 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
|
|
[=====>...............] reshape = 26.1% (511295616/1953494784) finish=1001.1min speed=24008K/sec
|
|
```
|
|
|
|
Another 300 minutes (5 hours) shaved off the remaining time. With a remaining time of less
|
|
than 17 hours for something which initially needed 3.5 days, I was very pleased.
|
|
|
|
And the process seems to have sped up even more as it is now - 9.5 hours later - nearing completion:
|
|
|
|
```
|
|
root@DiskStation:~# cat /proc/mdstat
|
|
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
|
|
md3 : active raid5 sdd6[2] sda6[0] sdb6[1]
|
|
1953494784 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
|
|
[===================>.] reshape = 95.9% (1874314432/1953494784) finish=20.1min speed=65521K/sec
|
|
```
|
|
|
|
|
|
UPDATE
|
|
======
|
|
|
|
After replacing the second disk, there was another *reshape* going on, but this time, the speed
|
|
lingered at 20-30 MB/sec which isn't much given that it went up to 80 MB/sec for the first disk.
|
|
|
|
However, after some more research, I found [this comment](https://www.cyberciti.biz/tips/linux-raid-increase-resync-rebuild-speed.html#comment-20767)
|
|
which explained how the system only speeds up to `speed_limit_max` when there's no other disk I/O
|
|
going on and otherwise keeps the speed at `speed_limit_min`. That made sense as the default
|
|
`speed_limit_min` is `10000` (or 10 MB/sec) and I already increased it to `20000` yesterday.
|
|
|
|
Why the Synology thought there was other activity and kept the transfer speed down, I don't know.
|
|
|
|
But now I increased the minimum speed further to 60 MB/s:
|
|
|
|
sysctl -w dev.raid.speed_limit_min=60000
|
|
|
|
And suddenly the reshaping speed also increased to around 60 MB/sec. I slightly increased it
|
|
further until I ended up at a value of `90000` (90 MB/s) and a real speed of around
|
|
80-90 MB/sec.
|
|
|
|
This cut the remaining time down from 12 hours to 3.
|
|
|
|
|
|
|
|
*[MiB]: Mebibyte (1024 KiB), similar to Megabyte (1000 kB)
|
|
*[KiB]: Kibibyte (1024 Bytes), similar to Kilobyte (1000 Bytes)
|