mirror of
https://github.com/mbirth/wiki.git
synced 2024-12-26 23:14:06 +00:00
52 lines
2.5 KiB
Markdown
52 lines
2.5 KiB
Markdown
---
|
|
title: ASUS WL-300g
|
|
layout: default
|
|
created: 2009-02-02 23:18:42 +0100
|
|
updated: 2009-02-02 23:18:42 +0100
|
|
toc: true
|
|
tags:
|
|
- know-how
|
|
- hacking
|
|
- hardware
|
|
- wifi
|
|
- asus
|
|
- firmware
|
|
---
|
|
Install DD-WRT
|
|
==============
|
|
|
|
**Download:** [dd-wrt.com](http://www.dd-wrt.com/dd-wrtv2/down.php?path=downloads%2Fv24-sp1%2FConsumer%2FAsus%2FWL300g/)
|
|
|
|
|
|
Patching firmware
|
|
-----------------
|
|
|
|
Older versions of DD-WRT didn't provide a firmware file for the WL-300g, but only for the WL-500gx. So I had to patch it for the WL-300g to accept.
|
|
|
|
The router ID was found quick: In the `dd-wrt.v23_asus.trx` at `0x356fc4`, there's the string
|
|
|
|
57 4c 35 30 30 67 78
|
|
|
|
which is `WL500gx`. After changing it to `WL300g ` (with a space after the "g" to fill up the digit), the router didn't reject the
|
|
firmware directly, but initiated the update, then rebooted quickly after that and showed the old firmware again.
|
|
|
|
According to the [DD-WRT manual for the WL-500g](http://www.dd-wrt.com/wiki/index.php/Installation#Asus_WL500G</u>.28Original.29),
|
|
the router should have a recovery mode which you can enable by holding the Reset button while powering on the device. But seems this mode wasn't there in my router.
|
|
|
|
So there has to be some sort of checksum which tells the router whether the firmware file is corrupt or not. In the DD-WRT forums
|
|
I read somewhere, that there are only some informational bytes different between a normal DD-WRT binary firmware and the ASUS TRX format - maybe the ID-string at the end.
|
|
|
|
Therefore I compared the two files `dd-wrt.v23_asus.trx` and `dd-wrt.v23_generic.bin` and voilà: Besides the few bytes at the end of
|
|
the file, there were 4 additional bytes different at position `0x08`. This HAD to be the checksum. The remaining question was, from
|
|
which bytes it was calculated. Since the seemingly compressed data began at `0x28`, I tried from there to the end and used
|
|
[Hex-Workshop](http://www.hexworkshop.com/) to calculate different checksums, but nothing matched what was in these 4 bytes. The next
|
|
try was from `0x10` but also no match. Then I tried starting directly after the checksum in the header, from `0x0c` and bang:
|
|
The CRC32 checksum matched that in the header.
|
|
|
|
|
|
|
|
So I calculated the CRC32 of my modified file and changed the header - and now I could upload the DD-WRT file using the normal firmware
|
|
upgrade of the original firmware. After installing v23, you can easily update to v24 using the DD-WRT web interface.
|
|
|
|
|