mirror of
https://github.com/mbirth/wiki.git
synced 2024-12-27 23:24:06 +00:00
341 lines
13 KiB
Markdown
341 lines
13 KiB
Markdown
---
|
|
title: Crossgrade firmware in SmartEye IP camera
|
|
language: en
|
|
layout: default
|
|
created: 2016-11-13 23:31:43 +0100
|
|
updated: 2016-11-13 23:31:43 +0100
|
|
toc: true
|
|
tags:
|
|
- know-how
|
|
- hacking
|
|
- firmware
|
|
- ip-camera
|
|
- smarteye
|
|
- wansview
|
|
- instar
|
|
---
|
|
A few years ago, I got a [Wansview](http://www.wansview.com/) NCH-536MW IP
|
|
camera. That was one of the first 720p cameras with night-vision, motion and
|
|
all features you could wish for.
|
|
|
|
|
|
|
|
One problem, though: The user interface looks awfully outdated and half of the
|
|
setup only works in Microsoft Internet Explorer and only if you have some
|
|
Chinese OCX browser plugin installed. (Compared to Foscam, however, you can at
|
|
least setup most things without that plugin. With Foscam cameras, you can't even
|
|
login if you don't have their plugin installed.)
|
|
|
|
{: height="160px"}
|
|
{: height="160px"}
|
|
|
|
While that works, once you have everything set up, it's always a hassle to
|
|
change a setting - especially as a Linux user. I need to power up a Windows VM
|
|
to change anything. And I don't like that.
|
|
|
|
However, the German company [Instar](http://www.instar.com/) developed an
|
|
awesome HTML5 interface which works like a charm and is cross-browser
|
|
compatible. It even works from Linux. And you can setup everything without the
|
|
need for any plugin.
|
|
|
|
{: height="200px"}
|
|
|
|
|
|
Brothers in spirit (and hardware)
|
|
=================================
|
|
|
|
The problem is: There are various different models of IP cameras out there and
|
|
while they may share the same body, they can have totally different hardware
|
|
inside. (Camera bodies are re-used amongst companies to not having to spend
|
|
resources on designing one.)
|
|
|
|
But luckily that's not the case with the NCH-536MW. Because the company behind
|
|
it, Wansview, is also known as *Shenzhen Smarteye Digital Electronics Co.*. And
|
|
under the [SmartEye](http://www.smarteyegroup.com/) branch, they sell these
|
|
cameras to OEMs. And those OEMs may use the original firmware, or, provide their
|
|
customers with a customised one.
|
|
|
|
The hardware I have is sold under these product names:
|
|
|
|
* Wansview NCH-536MW
|
|
* AGASIO A522W (original UI)
|
|
* DERICAM H501W (customised UI)
|
|
* Foscam FI9820W (customised UI)
|
|
* INSTAR IN-6011HD (customised UI)
|
|
|
|
There's a HiSilicon Hi3511-compatible SoC with a 16MB Flash memory in it.
|
|
|
|
|
|
Firmwares
|
|
=========
|
|
|
|
Firmware updates come in form of a `.pkg` file. For the Wansview variant, the
|
|
latest one is `B12SE_V1.4.0.1.9_536mP1.pkg`. The INSTAR one is named
|
|
`B12SE_V60.1.1.4_536mP1_60.11.1.2.18.pkg` and Foscam's latest firmware for the
|
|
FI9820W is `B12FC_V3.2.6.1.1_0807Hd9820P1.pkg`. (`SE` = SmartEye/Wansview, `FC`
|
|
= Foscam)
|
|
|
|
If you take a closer look at those files, you'll notice that they consist of
|
|
144 Bytes header data (188 Bytes in older versions) and the rest is a JFFS2
|
|
image, around 9-point-something MiB in (compressed) size.
|
|
|
|
You can get the plain JFFS2 file by running, e.g.:
|
|
|
|
dd if=B12SE_V60.1.1.4_536mP1_60.11.1.2.18.pkg bs=1 skip=144 of=root.jffs2
|
|
|
|
You can then mount it with [these commands](https://www.kutukupret.com/2010/09/16/mounting-a-jffs2-filesystem-in-linux/)
|
|
(you probably have to use `sudo` with each of them):
|
|
|
|
mknod /tmp/mtdblock0 b 31 0
|
|
modprobe mtd
|
|
modprobe jffs2
|
|
modprobe mtdram total_size=32767
|
|
modprobe mtdblock
|
|
|
|
dd if="root.jffs2" of=/dev/mtd0
|
|
|
|
mount -t jffs2 /tmp/mtdblock0 /mnt/jffs2
|
|
|
|
However, this isn't much use as we want to get the files onto the camera, not
|
|
on our desktop PC.
|
|
|
|
Sadly, the normal firmware updater doesn't allow files from a different
|
|
reseller. So we have to find another way. And there is one.
|
|
|
|
|
|
Hardware
|
|
========
|
|
|
|
<p><div class="noteclassic" markdown="1">
|
|
To continue, you'll need a USB-to-TTL serial adapter. I've got [this one](https://www.amazon.co.uk/gp/product/B00AFRXKFU/)
|
|
which works great. Make sure to get one with a CP2102 as there are a lot of fake
|
|
PL2303 and FT232RL chips around and drivers might block them.
|
|
</div></p>
|
|
|
|
If you open up the camera, you'll notice several unpopulated connectors on the
|
|
PCB. What you're looking for is the (mostly) 4-pin console port. A serial port
|
|
which acts as the main input/output interface to the system. And this is it:
|
|
|
|
{: height="260px"}
|
|
|
|
Only 3 pins are important to us: Rx (green), Tx (red) and the GND (white) pin.
|
|
The fourth is supplying 3.3V which we don't need.
|
|
|
|
Once you've wired everything correctly and connected the serial adapter to your
|
|
computer, a new serial port should show up. Connect to it using a terminal
|
|
program, e.g. [minicom](https://alioth.debian.org/projects/minicom) or [KiTTY](http://kitty.9bis.net/).
|
|
The comm parameters are: 115200 8 N 1, e.g. `minicom -b 115200 -D /dev/ttyUSB0`.
|
|
After you've set up everything, plug in the camera.
|
|
|
|
You should see the boot process, [U-Boot](http://www.denx.de/wiki/view/U-Boot)
|
|
first followed by the linux kernel. The first few lines look like this:
|
|
|
|
~~~
|
|
U-Boot 1.1.4 (Apr 8 2009 - 11:41:01)
|
|
U-Boot code: E0500000 -> E0517540 BSS: -> E051E2BC
|
|
HI_VERSION=U_BOOT_1_1_4-M08C0305B0301 @Hi3511v110_OSDrv_1_0_0_7 2009-03-18 20:44:35
|
|
RAM Configuration:
|
|
Bank #0: e0000000 128 MB
|
|
Flash: 16 MB
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
MAC: 00-25-07-00-00-3B
|
|
Hit any key to stop autoboot: 0
|
|
|
|
Memory policy: ECC disabled, Data cache writeback
|
|
CPU0: D VIVT write-back cache
|
|
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
|
|
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
|
|
Built 1 zonelists
|
|
Kernel command line: mem=72M console=ttyAMA0,115200 root=1f01 rootfstype=jffs2 mtdparts=phys_mapped_flash:2M(boot),13M(rootfs),1M(setting)
|
|
PID hash table entries: 512 (order: 9, 8192 bytes)
|
|
Console: colour dummy device 80x30
|
|
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
|
|
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
|
|
Memory: 72MB = 72MB total
|
|
Memory: 71168KB available (1461K code, 175K data, 76K init)
|
|
~~~
|
|
|
|
|
|
U-Boot Basics
|
|
=============
|
|
|
|
Notice the *"Hit any key to stop autoboot"* message. If you press any key at
|
|
that step, you'll be dropped into the U-Boot bootloader. That's where we want
|
|
to be.
|
|
|
|
Type `help` to get a list of supported commands:
|
|
|
|
```
|
|
hilinux # help
|
|
|
|
? - alias for 'help'
|
|
base - print or set address offset
|
|
bdinfo - print Board Info structure
|
|
bootm - boot application image from memory
|
|
bootp - boot image via network using BootP/TFTP protocol
|
|
cmp - memory compare
|
|
cp - memory copy
|
|
crc32 - checksum calculation
|
|
dhcp - invoke DHCP client to obtain IP/boot params
|
|
echo - echo args to console
|
|
erase - erase FLASH memory
|
|
flinfo - print FLASH memory information
|
|
go - start application at address 'addr'
|
|
help - print online help
|
|
loadb - load binary file over serial line (kermit mode)
|
|
loop - infinite loop on address range
|
|
md - memory display
|
|
mm - memory modify (auto-incrementing)
|
|
mtest - simple RAM test
|
|
mw - memory write (fill)
|
|
nm - memory modify (constant address)
|
|
ping - send ICMP ECHO_REQUEST to network host
|
|
printenv- print environment variables
|
|
protect - enable or disable FLASH write protection
|
|
rarpboot- boot image via network using RARP/TFTP protocol
|
|
reset - Perform RESET of the CPU
|
|
saveenv - save environment variables to persistent storage
|
|
setenv - set environment variables
|
|
tftp - download or upload image via network using TFTP protocol
|
|
version - print monitor version
|
|
```
|
|
|
|
Of those, we need three commands: `setenv`, `tftp` and `erase`.
|
|
|
|
|
|
Setting up the TFTP connection
|
|
==============================
|
|
|
|
First, we need to setup the connection to the PC. Make sure to connect the
|
|
camera via ethernet cable to your network. And you need to setup a tftp server
|
|
on your PC. I used [atftpd](https://sourceforge.net/projects/atftp/). For
|
|
Windows, there's [tftpd32](http://tftpd32.jounin.net/tftpd32.html).
|
|
|
|
Now, we need to configure the IPv4 settings. Use these commands:
|
|
|
|
```
|
|
setenv ipaddr 172.16.99.9
|
|
setenv netmask 255.255.0.0
|
|
setenv serverip 172.16.1.2
|
|
```
|
|
|
|
`ipaddr` is the IP address of your camera (or some other unused IP address in
|
|
your network). `serverip` is the IP address of your PC (or where your TFTP
|
|
server is running). And `netmask` is, of course, the netmask of your network.
|
|
|
|
|
|
Memory layout
|
|
=============
|
|
|
|
The 16M flash memory is located at address 0x34000000 until 0x34ffffff and
|
|
partitioned like this:
|
|
|
|
* 0x34000000 - 0x341fffff = boot area
|
|
* 0x34000000 is the U-Boot start area
|
|
* 0x34100000 is the linux kernel
|
|
* 0x34200000 - 0x34efffff = JFFS2 root filesystem
|
|
* 0x34f00000 - 0x34ffffff = settings
|
|
|
|
And yes, the JFFS2 root filesystem is the JFFS2 data from the firmware update
|
|
files (see above).
|
|
|
|
|
|
Making a backup
|
|
===============
|
|
|
|
If you check the help for the `tftp` command, its syntax is like this:
|
|
|
|
tftp address filename [length]
|
|
|
|
If `[length]` is given, it will **UPLOAD** a file to your TFTP server, if it
|
|
is omitted, it will **DOWNLOAD** a file from your TFTP server and flash that
|
|
into the memory.
|
|
|
|
So, since we know the memory layout, a complete backup of everything but the
|
|
bootloader (to not risk corrupting it) is as easy as:
|
|
|
|
tftp 0x34100000 recovery.bin 0xf00000
|
|
|
|
This will upload a file named `recovery.bin` with the linux kernel and JFFS2
|
|
image to your TFTP server.
|
|
|
|
If you should run into problems, you can recover by entering:
|
|
|
|
erase 0x34100000 +0xf00000
|
|
tftp 0x34100000 recovery.bin
|
|
|
|
|
|
Flashing new firmware
|
|
=====================
|
|
|
|
If you read until here, it should be clear what to do. After extracting the
|
|
JFFS2 image file from, e.g. the INSTAR firmware (see above), you just have to
|
|
put it on your TFTP server to make it accessible to the camera. Let's say you
|
|
named it `instar.jffs2`.
|
|
|
|
Since we know the memory area for the JFFS2 image, we can first erase it by
|
|
issuing the command:
|
|
|
|
erase 0x34200000 +0xd00000
|
|
|
|
This erases the whole JFFS2 memory area, i.e. it sets all bits to `1`.
|
|
|
|
After this is complete, you just have to flash the file from the TFTP server:
|
|
|
|
tftp 0x34200000 instar.jffs2
|
|
|
|
That's it. You can now reboot the camera into the INSTAR firmware:
|
|
|
|
bootm 0x34100000
|
|
|
|
(This boots from memory at address 0x3410000 - the linux kernel, which will then
|
|
mount the JFFS2 image and continue booting from there.)
|
|
|
|
|
|
Problems
|
|
========
|
|
|
|
If you see something like this on bootup of a newly flashed firmware:
|
|
|
|
```
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x0000000c: Read 0x41c0224d, calculated 0x97e7f5c5
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x00000038: Read 0x5a000025, calculated 0x1b754c4d
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x0000007c: Read 0x53804006, calculated 0x88f20f93
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x000000a8: Read 0x1a180001, calculated 0x05c7cb76
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x000000ec: Read 0x130c0000, calculated 0x84df6ac9
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x00000118: Read 0xeb290421, calculated 0x5025ee1e
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x0000015c: Read 0x00006680, calculated 0x061da826
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x00000188: Read 0xaa620051, calculated 0x4e976925
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x000001cc: Read 0x91724800, calculated 0x6a08a595
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x000001f8: Read 0x10481681, calculated 0xceb194da
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x0000023c: Read 0x041c0010, calculated 0x936f78f5
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x00000268: Read 0xadab3105, calculated 0x16f7db7a
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x000002ac: Read 0x0108e480, calculated 0xc7802b02
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x000002dc: Read 0x13e23050, calculated 0xb31f5628
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x00000320: Read 0x0005c825, calculated 0x9bdee4df
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x0000034c: Read 0x44643000, calculated 0xc2233f22
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x00000390: Read 0x0b70408d, calculated 0xd00bb938
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x000003c0: Read 0x18509440, calculated 0xe7085f3d
|
|
jffs2_scan_dirent_node(): Node CRC failed on node at 0x00000410: Read 0x13400000, calculated 0xac90de05
|
|
jffs2_scan_inode_node(): CRC failed on node at 0x0000043c: Read 0x6d822094, calculated 0xd6ce08ab
|
|
```
|
|
|
|
This means that you forgot to erase the memory area before flashing a new
|
|
firmware. Since "flashing" can only change bits from `1` to `0`, it runs into
|
|
problems when there should be a `1` where there already is a `0`, e.g.:
|
|
|
|
Old data: 0101 0101
|
|
New data: 1100 1100
|
|
Flash data: 0100 0100
|
|
|
|
Using the `erase` command resets all bits to `1`.
|
|
|
|
|
|
Read more
|
|
=========
|
|
|
|
* [forum.hardware.fr](http://forum.hardware.fr/hfr/HardwarePeripheriques/webcam-camera-ip/unique-wansview-camera-sujet_56652_12.htm#t701130)
|
|
* [openipcam.com](http://www.openipcam.com/forum/index.php?topic=342.0)
|