mirror of
https://github.com/mbirth/wiki.git
synced 2024-11-14 14:06:46 +00:00
40 lines
1.4 KiB
Markdown
40 lines
1.4 KiB
Markdown
---
|
|
title: ZyXEL Prestige 660HW-67
|
|
language: en
|
|
layout: default
|
|
created: 2009-02-02 20:55:24 +0100
|
|
updated: 2009-02-02 20:55:24 +0100
|
|
toc: false
|
|
tags:
|
|
- know-how
|
|
- hacking
|
|
- hardware
|
|
- zyxel
|
|
- prestige
|
|
- router
|
|
---
|
|
The 660HW-67 was distributed in Germany as the "WLAN Modem 100" through the Arcor ISP. It came with the firmware `QD.7`
|
|
which seems to be originally made for AOL.
|
|
|
|
To get the router ready for ADSL2+, I needed the `QQ.7` firmware which is the original one.
|
|
|
|
|
|
Firmware crossgrade
|
|
===================
|
|
|
|
**Manual:** [dslrouter-hilfe.de](http://www.dslrouter-hilfe.de/forum/showthread.php?t=16411)
|
|
|
|
The big problem is that the `rom-0` of the original firmware is 48 KiB whereas that of the AOL firmware is only
|
|
*16 KiB*. Usually, you make an upgrade by updating the `rom-0` file (which contains default settings) and then update
|
|
the firmware itself which then reads the new default settings upon the next boot. Since the router didn't accept the
|
|
new settings, it stuck after the reboot.
|
|
|
|
This is how it works (using the serial connector on the PCB and a terminal program):
|
|
|
|
1. upload the new firmware file completely
|
|
* the router will complain that the `rom-0` doesn't match and ask you to upload a new firmware
|
|
1. upload the new firmware again but cancel the upload after about 600 KiB (~12 min at 9600 baud)
|
|
* the router will boot into a debug mode
|
|
1. upload the new `rom-0` file
|
|
1. upload the new firmware file
|